Print this page

SK401 solar collector

Solar solution,solar panel,photovoltaic,solar water heater,solar controller,inverter,light,vacuum tubes

1. Reliable, efficient, evacuated tubes
2. Copper heat pipes for rapid heat transfer
3. Easy plug-in installation
4. Maintenance Free
5. Suitable for mains pressure water (working pressure: 0.6MPa)
6. Corrosion resistant copper header
7. All aluminium frame and manifold cover
8. Stable solar conversion throughout the day
9. The perfect solar collector for domestic solar water heater systems
10. Ideal for commercial solar water heating applications

The operation of the Suunny solar collector is very simple.
1. Solar Absorption: Solar radiation is absorbed by the solar tubes and converted into heat.
2. Solar Heat Transfer:
Heat pipes conduct the heat from within the solar tube up to the header pipe.
3. Solar Energy Storage: Water is circulated through the header, via intermittent pump cycling. Each time the water circulates through the header the temperature is raised by 5-10C / 9-18F. Throughout the day, the water in the storage tank is gradually heated.

Specification:

Suunny Solar Collector General Specifications

Manifold Casing Material

aluminium

Frame Material

aluminium

Header Pipe Material

C12200 Copper

Insulation

Polyurethane foam

Rubber Seals and Rings

Stabilized high temperature silicone rubber

Optimal installation angle

30-70 degree Vertical, 0 Horizontal

Maximum Operating Pressure

0.6—0.8 MPa

Optimal flow rate

0.1L/min/tube - 0.026G/min/tube

Model:

Tube length
Tubes no Stadard
Sunlight absorb area
Thickess
Shape size
(mm)
m2
mm
(mm)
Ø58X1800
15
1.95
50
1225x1960x110
18
2.34
50
1450x1960x110
20
2.74
50
1600x1960x110
24
3.14
50
1900x1960x110
30
3.64
50
2350x1960x110