Print this page

SK404 integrated pressurized solar water heater

Solar solution,solar panel,photovoltaic,solar water heater,solar controller,inverter,light,vacuum tubes

Integrated pressurized solar water heaters are all-glass evacuated solar domestic water system combined with heat pipes.
The selective coating in the inner cover of the evacuated tubes ensures high energy absorption and low heat radiance losses, which convert solar energy into heat energy and transfer to heat pipe by aluminum fin.
The liquid in the heat pipe change into vapour by heating, the vapour goes up within the heat pipe.
When heat is exchanging between the condenser end of the heat pipe with the water in the tank, it turns into liquid again, then comes down to the base of the heat pipe, this cycle continuously repeats as long as the sun shines.
In this way the heat is transferred from heat pipe to the cold water in the tank.
When the hot water can be obtained by injecting cold water from the bottom of the tank.
The evacuated tubular collector with heat pipes can be quasi-tracking in four seasons, the collector will be in operation as long as sun shines.
Integrated pressurized series solar water heaters can be in service all year round even in cold climate areas resulted in that heat pipes transfer heat in one direction only within the collector.

MODEL:

Model

Style of vacuum
tube(mm)

NO.of tubes

Tank capacity(L)

Aperture area(m2)

Size (mm)

SK404-20

58-1800

20

200L

1.95

1950*1800*50

SK404-25

58-1800

25

250L

2.34

2410*1800*50

SK404-30

58-1800

30

300L

2.74

2810*1800*50

SPECIFICATION

Highly efficient absorber of high performance with daily average efficiency over 50%;
Start up quickly, heat pipe transfer the heat energy into the storage tank in one direction.
Withstand pressure of 6MPa, can be connected directly with city water pipe.
Higher daily efficiency than JB series.
The storage tank and the heat pipe are metallic sealed;
No water inside the evacuated tubes; the solar water heater can still in service even with several tubes breakage;
Stainless steel inner cylinder stands 100,000 fatigue tests without any distortion;
Highly efficient insulation with polyurethane foam;
Simple structure, easy to assembly and install, diffuse flat plate reflector can be assembled easily with its module structure;
Can be used all year round in the cold climate;
Can be used together with Auxiliary electric boost;
Automatically controlled;
Long service life, can be used as long as 15 years;
Large-scale solar hot water system can be installed either with parallel or series connections.